|
Many decades’ experience combined with modern
technology and production methods guarantee highest
precision and performance for RAIMANN machines. The
ProfiRip KM 310 series from RAIMANN’s range of gang
ripsaws is the ideal starting place for more economical
ripping. The basic machine is solid steel construction with
a fixed fence on the right and conforms to strict European safety norms (CE) as well as the German BG regulations for dust protection.
| TECHNICAL DATA - MATERIAL |
| Cutting width |
1" - 12 ¼” |
| Throat opening |
25 ½” |
| Min. strip width |
7/8" |
| Max. cutting height with pressure board |
3” |
| Max. cutting height without pressure board |
3” |
| Min. material length |
15 ¾” |
|
| TECHNICAL DATA – MACHINE |
| Arbor motor |
50 HP |
| Nominal voltage |
600V, 60 Hz, 3 ph |
| Nominal current |
75 A |
| Chain width |
13 ½” |
| Dia. of saw arbor |
65 mm |
| Saw blade bore |
80 mm |
| Revolutions of saw arbor |
4200 rpm |
| Standard saw blade diameter |
300 mm/11.8" |
| Feed speed, infinitely variable |
up to 115’/min |
| Feed motor capacity |
1 HP |
| Working height |
33 ½” |
|
FEATURES:
- Cutting accuracy of +/- 0.008” ensured by the cast-iron transport chain which runs on dual v-guiding system,
providing superior board control. Includes wear resistant chain dip.
- Fast set-up of arbor with Quickfix blade positioning and Laser-fix pivoting lasers
- Easy feeding thanks to an extended transport chain with spikes. Just put the board on the chain and it is transported effortlessly into the machine.
- Operator friendly, easy access wide open hood and centrally arranged control elements
- Low maintenance closed transport chain for interruption-free production, automatic chain lubrication and
maintenance-free saw arbor bearings
- Safety for personnel provided by 5-fold anti-kick-back protection, and locking safety hood with noise protection
STANDARD EQUIPMENT:
- Patented Raimann long-lasting and precise Dip Chain means outstanding cutting precision over years and years due to parallel double V-Guides and closed chain link design.
The ProfiRip KM 310 M Gang Rip Saw is equipped standard with the Quickfix arbor. This feature allows quick changeover of rip widths and sizes WITHOUT having to use a SLEEVE and SPACER set. It's as easy as 1, 2, 3…
TOTAL CHANGE TIME WITH THE QUICKFIX METHOD: 1 – 2 MINUTES.
vs.
10 – 15 Minutes if you used a traditional sleeve and spacer set up.
Quickfix is faster and easier! |
|
Print
this Page
