Print this Page



 

Levia 320 - 1100 RK
2 HEAD WIDE BELT SANDER
For General Purpose Solid Wood and Veneer Sanding

DESCRIPTION:
- First Operating Unit
-150 mm diameter with 85 shore rubber roller
-Pneumatic 1st roller on/off selector on the control panel
-Fitted with a 4 position revolver system for 4 different types of sanding belts
-Second Operating Unit
-150 mm diameter with 65 shore rubber roller
-Pneumatic 2nd roller on/off selector on the control panel
-Fitted with a 4 position revolver system for 4 different types of sanding belts
-Pad is an electronic 20 section platen with stiff and semi-stiff felt sanding pad with graphite cloth held by screws
- Base: monocoque shell type, nut and bolt free, the frame is electro-welded using robot
  technology to guarantee maximum rigidity and precision.
- Worktable vertical movement: by means of 4 heavy duty trapezoidal screws anchored
  externally to the base, supported by thrust bearings and coupled by means of stiffener
  bars to guarantee perfect alignment and stability.
- Electronic displays of work piece thickness.
- Support rollers: one at the in feed and one at the out feed and of the feed belt.
- Pressure Shoes located before and after the operating units.
- Flexible steel plate presses located in front of the opening units.
- Electronic sanding belt tracking system.
- Feed belt in 60 Shore rubber with automatic belt tracking.
- Brakes on each operating unit.
- Main motor automatic star - delta starter.

OPTIONAL EQUIPMENT / SPECIFICATIONS (INCLUDED):
-Automatic feed belt tracking
-Pressure shoes located before and after operating units
-3 additional support rollers at the in feed
-3 additional support rollers at the out feed
-Automatic table positioning
-Pneumatic enabling/disabling of working units from the control panel
-Semi stiff sanding pad
-Automatic sanding pad action
-Variable speed in feed belt
-2 speed main motor
-Electronic 20 section platen for sanding pad on 2nd Unit
-Sanding belt cleaning blowers on 2nd unit
-Anti-Dubbing

TECHNICAL CHARACTERISTICS:

Working Width 1100 mm
Working Height 3 to 200 mm
Sanding Belt Size 1120 x 2150 mm
1st Main Motor 25 / 2 Hp / Speed
2nd Main Motor 20 / 2 Hp / Speed
In Feed Motor 2 Hp
In Feed Motor Speed 3.5 to 20 m/min
Electrics 600 / 3 / 60 Volts / Phase / Cycles
Working Pressure 6 Bars
Dust Extraction Port Diameter 140 mm
Dust Extraction Suction 2450 / 1450 cmh / cfm


    

 
what's new :: company overview :: we represent :: service/training :: profile knife grinding
new machinery :: used machinery :: featured machinery :: specials :: contact us
Contact Us